<sup id="qoa0c"></sup>
<sup id="qoa0c"><noscript id="qoa0c"></noscript></sup>
<sup id="qoa0c"><div id="qoa0c"></div></sup>
<acronym id="qoa0c"></acronym>
<rt id="qoa0c"><small id="qoa0c"></small></rt>
<acronym id="qoa0c"><small id="qoa0c"></small></acronym><rt id="qoa0c"><small id="qoa0c"></small></rt>
<acronym id="qoa0c"><small id="qoa0c"></small></acronym>
  • 手機版
  • 上海雨芯儀器主營EA電源、進口電源、可編程直流電源、雙向電源、程控電源、能量回饋式電源

產品分類

直流電源
-德國EA電源 -切克斯線性直流電源 -愛科賽博直流電源 -TECHNIX高壓直流電源 -鼎陽直流電源 -是德直流電源 -TDK電源 -Sorensen直流電源
直流電子負載
-德國EA直流電子負載 -愛科賽博電子負載 -費思直流電子負載
電池測試儀
-EA電池測試儀 -一諾電池測試儀
高精度交流電源
-愛科賽博交流電源 -是德交流源
萬用表
-吉時利萬用表 -是德萬用表
示波器
-鼎陽示波器 -是德示波器
信號源
-鼎陽函數/任意波形發生器 -鼎陽射頻信號發生器 -是德任意波形發生器 -是德信號發生器和信號源
頻譜分析儀
-鼎陽頻譜分析儀 -是德頻譜分析儀
矢量網絡分析儀
-鼎陽矢量網絡分析儀
數字源表
-是德數字源表
測溫儀
頻率特性分析儀
頻率計數器
多功能開關測量單元
直流電源分析儀
-是德直流電源分析儀
高斯計
功率計
-一諾功率計
功率分析儀
-一諾功率分析儀
數據采集儀
-一諾數據采集儀 -是德數據采集儀
當前位置:首頁>產品中心>ELR 10000 3U>EA回饋式電子負載 ELR 10080-340 3U 德國進口電子負載-在途

EA回饋式電子負載 ELR 10080-340 3U 德國進口電子負載-在途

  • 價格:面議
購買咨詢:

產品介紹

    EA-ELR 10080-340 3U為德國EA最新推出的回饋式電子負載,在進口直流電子負載中被廣泛用于汽車測試,光伏測試等領域。

    EA-ELR 10080-340 3U產品技術規格書(點擊右鍵另存為)德國EA代理,上海雨芯儀器科技有限公司提供

    EA-ELR 10080-340 3U Features

    Wide range input, 110 V - 240 V +10 % 1ph AC
    Active Power-Factor-Correction, typical 0.99
    Regenerative with energy recovery into the grid
    Very high efficiency up to over 95 %
    Voltage from 0 - 80 V up to 0 - 1500 V
    Currents from 0 - 6 A up to 0 - 120 A
    Flexible power regulated DC input stages  (autoranging)
    Regulation mode CV, CC, CP, CR with fast crossover
    Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
    Color 5“ TFT display with touch control and intuitive user interface
    Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series
    Master-Slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
    Integrated function generator with predefined curves
    Integrated battery test mode
    Photovoltaics test mode, MPPT
    Command languages and drivers: SCPI and ModBus,LabVIEW, IVI

    Build-in Interfaces
    USB 
    Ethernet
    Analog
    USB Host
    Master-Slave-Bus
    Share-Bus
    Software
    EA-Power Control
    Optional Interfaces
    CAN
    CANopen
    RS232
    Profibus
    EtherCAT
    Profinet, with one or two ports
    Modbus, with one or two ports
    Ethernet, with one or two ports

    Technical Specifications EA-ELR 10080-340 3U
    DC-Input
     
    Voltage range
    0 - 80 V
    Ripple rms CV ≤10 mV BW 300 kHz
    Ripple and noise p-p CV ≤100 mV BW 20 MHz
    UMin for IMax (Sink) <0.5 V
    Current range 0 - 340 A
    Power range *1 0 - 10000 W
    Resistance range 0.008 Ω - 13 Ω
    Output capacity 15980 μF
    Efficiency up to 94.5% *1
    Isolation  
    Negative DC-Pol <-> PE
    ±600 V DC
    Positive DC-Pol <-> PE +600 V DC
    Article number 33200833

    *1 100% Power and 100% Output voltage

    General specifications  
    AC Input
     
    Voltage, Phases
    208 V / 380 V / 400 V / 480 V ±10%, 3ph AC (208 V 3ph AC with Derating to 9 kW)
    Frequency 45-66 Hz
    Power factor >0.99
    Leakage current < 5 mA
    Overvoltage category 2
    Pollution degree 2
    DC Input static  
    Load regulation CV
    ≤0.05% FS (0 - 100% load, constant input voltage and constant temperature)
    Line regulation CV ≤0.01% FS  (208 V - 480 V AC +10% input voltage, constant load and constant temperature)
    Stability CV ≤0.02% FS (Over 8hrs interval following 30 minutes warm-up, constant input voltage, load and temperature)
    Temperature coefficient CV ≤30ppm/°C (Following 30 minutes warm up)
    Compensation (Remote Sense) ≤5% UNominal
    Load regulation CC ≤0.1% FS (0 - 100% load, constant input voltage and constant temperature)
    Line regulation CC ≤0.01% FS (208 V - 480 V AC +10% input voltage, constant load and constant temperature)
    Stability CC ≤0.02% FS (Over 8hrs interval following 30 minutes warm-up, constant input voltage, load and temperature)
    Temperature coefficient CC ≤50ppm/°C (Following 30 minutes warm up)
    Load regulation CP ≤0.3% FS (0 - 100% load, constant input voltage and constant temperature)
    Load regulation CR ≤0.3% FS + 0.1% FS current (0 - 100% load, constant input voltage and constant temperature)
    Protective functions  
    OVP
    Overvoltage protection adjustable, 0 - 110% UNominal
    OCP Overcurrent protection adjustable, 0 - 110% INominal
    OPP Overpower protection adjustable, 0 - 110% PNominal
    OT OT Overtemperature protection, output shuts down in case of insufficient cooling
    DC Input dynamic  
    Rise time 10 - 90% CC
    ≤10 ms
    Fall time 90 - 10% CC ≤10 ms
    Display accuracy  
    Voltage
    ≤0.05% FS
    Current ≤0.1% FS
    Insulation  
    AC Input to DC Input 3750 Vrms (1 Minute), creepage >8 mm
    AC Input to case (PE) 2500 Vrms
    DC Input to case (PE) Depending on the model, see model table
    DC Input to Interfaces 1000 V DC (Model up to 360 V output), 1500 V DC (Model from 500 V output)
    Interfaces digital  
    Built-in, galvanically isolated USB, Ethernet (100 MBit) for communication
    1x USB Host for data acquisition
    Optional, galvanically isolated CAN, CANopen, RS232, ModBus TCP, Profinet, Profibus, EtherCAT, Ethernet
    Interfaces analog  
    Built-in, galvanically isolated 15-pole D-Sub
    Signal range 0 - 10 V or 0 - 5 V (switchable)
    Inputs U, I, P, R, remote control on/off, DC input on/off, resistance mode on/off
    Outputs Monitor U and I, alarms, reference voltage, status DC input, status CV/CC
    Accuracy U / I / P / R 0 - 10 V ≤0.2%, 0 - 5 V ≤0.4%
    Device configuration  
    Parallel operation Up to 64 units of any power class in series 10000, with Master-Slave-Bus and Share-Bus
    Safety and EMC  
    Safety EN 61010-1
    IEC 61010-1
    UL 61010-1
    CSA C22.2 No 61010-1
    BS EN 61010-1
    EMC EN 55011, class B
    CISPR 11, class B
    FCC 47 CFR Part 15B, Unintentional Radiator, class B
    EN 61326-1 include tests according to:
    - EN 61000-4-2
    - EN 61000-4-3
    - EN 61000-4-4
    - EN 61000-4-5
    - EN 61000-4-6
    Safety protection class 1
    Ingress Protection IP20
    Environmental conditions  
    Operating temperature 0 - 50 °C
    Storage temperature -20 - 70 °C
    Humidity ≤80% RH, non-condensing
    Altitude ≤2000 m (≤6600 ft)
    Mechanical construction  
    Cooling Forced air flow from front to rear, temperature controlled fans
    Dimensions (B x H x T) 19“ x 3U x 668 mm (Enclosure only, not over all)
    Weight 32.8 kg (72 lb)
在線客服

<sup id="qoa0c"></sup>
<sup id="qoa0c"><noscript id="qoa0c"></noscript></sup>
<sup id="qoa0c"><div id="qoa0c"></div></sup>
<acronym id="qoa0c"></acronym>
<rt id="qoa0c"><small id="qoa0c"></small></rt>
<acronym id="qoa0c"><small id="qoa0c"></small></acronym><rt id="qoa0c"><small id="qoa0c"></small></rt>
<acronym id="qoa0c"><small id="qoa0c"></small></acronym>